Edmonton Deck Permit Requirements: Heights, Railings & Red Tape
Published for YEG Residents • Municipal Reference: Alberta Building Code
A backyard deck is the ultimate Edmonton summer upgrade, but hammering that first joist without consulting the City can be a costly mistake. Both the Edmonton Zoning Bylaw and the Alberta Building Code govern outdoor construction, and the golden rule for homeowners comes down to a single measurement: 0.6 meters (2 feet).
If the walking surface of your planned deck sits lower than 0.6m above the ground, you generally do not require a development or building permit. However, the moment your design crosses that 2-foot threshold, you trigger a mandatory permitting process. Additionally, if your deck features a roof or permanent cover—regardless of how close it is to the ground—permits are always legally required.
Safety is the primary concern for elevated structures. Decks sitting between 0.6m and 1.8m above grade require continuous safety railings standing at least 0.90 meters (36 inches) high. If your deck soars higher than 1.8m, those guardrails must be elevated to 1.07 meters (42 inches). Spacing between balusters cannot allow a 10cm sphere to pass through, ensuring children cannot slip between the slats.
| Deck Height (Above Grade) | Permit Required? | Railing Requirement |
|---|---|---|
| Under 0.6m (2 ft) | No (if uncovered) | Not strictly required |
| 0.6m to 1.8m (2 ft to 5.9 ft) | Yes (Development & Building) | Minimum 0.90m (36 inches) |
| Over 1.8m (6 ft+) | Yes (Development & Building) | Minimum 1.07m (42 inches) |
| Any Height with a Roof | Yes (Always) | Depends on floor height |
Ready to Submit Your Plans?
Ensure you have your property plot plan and construction drawings ready before applying for your permits.